Testing & Certification

All tests on TempShield™ are performed at either nationally approved independent laboratories or at leading universities. Tests are performed to current American Society of Testing and Materials (ASTM) standards when a standard exists.

TempShield™ products have been evaluated by the following:

  • I.C.C. ES Evaluation Report No. 1362
  • I.C.B.O. ES Evaluation Report No. 5346
  • B.O.C.A. ES Evaluation Report No. 91-49.1
  • S.B.C.C.I. PST & ESI Evaluation Report No. 94102A
  • Dade County Evaluation Report No. 00-0628.02
     
  • Thermal Performance ASTM C236
  • Thermal Performance of Wall Systems ASTM C236
  • Thermal Performance ASTM C518
  • Thermal Performance of Crawl Space ASTM C236
  • Thermal Conductivity and Thermal Resistance of Blanket ASTM C518
  • Thermal Performance of TempShield™ and Fiberglass in Walls ASTM C236ls ASTM C236
     
  • Hot Surface Performance ASTM C411
  • Heat Transfer (Heat Flow Up, Down, Horizontal) ASTM C236
  • Heat Transfer of Air-Handling Ducts with TempShield™
  • Flame Spread and Smoke Density ASTM E84
  • Flame Spread and Smoke Density Single Bubble ASTM E84
  • Flame Spread and Smoke Density Single Bubble White ASTM E84
     
  • Adhesive Bleeding ICBO Acceptance Criteria
  • Fungus Resistance Mil-Std 810B Method 508
  • Pliability Test
  • Sound Absorption Test ASTM C423-90a and ASTM E795-83
  • Sound Transmission Loss ASTM E90-90 and ASTM E413-87
  • Water Vapor Transmission ASTM E96
  • Tensile Strength
  • Emittance Testing

NVLAP Approved Lab Tests:
Adhesive Bleeding per ICBO Evaluation Service, Report # LA 73577
Flame Spread Classification/ Smoke Density Developed (Taped Joint Detail), Test Report #LA 62595-1
Flame Spread Classification/ Smoke Density Developed (Unslit) Test, Report #LA 62517-2
Flammability of Interior Materials, Report # LA72357-2
NVLAP Approved Lab Test: Fungus Resistance MIL-STD-810B, Method 508, Report #LA73598

State of California
State of California Licensed Insulation Manufacturer
State of Minnesota: Filed with Minnesota Insulation Standards Program
Tennessee Technological University Emittance Testing

Warnock Hersey Professional Services, LTD:
Physical Properties Sheet Width, Length, Pliability, Water Vapor Permanence and Aged Water Vapor Permanence, Report #1/92
Water Vapor Transmission Test ASTM-E96 (Desiccant Method), Report #1/91


Our Reflective Bubble Insulation Products meet the California Insulation Standards License #TG1408

Our Radiant Barrier Products meet the California Insulation Standards License #TG1408


MANUFACTURER’S CERTIFICATION STATEMENT FOR THE AMERICAN RECOVERY AND REINVESTMENT ACT OF 2009

From: Innovative Insulation, Inc.
Address: 6200 West Pioneer Parkway, Arlington, Texas 76013
Re: Manufacturer’s Certification Statement for the American Recovery and Reinvestment Act of 2009
Product Type: Insulation

The products listed below are certified and qualified as Eligible Building Envelope Components for the American Recovery and Reinvestment Act of 2009, allowing a credit of 30% of the cost up to $1500 through the IRS, if placed in service from January 1, 2009 through December 31, 2010.

TempShield™ Double Bubble Foil/Foil
TempShield™ Double Bubble White/Foil
TempShield™ Single Bubble Foil/Foil
TempShield™ Single Bubble White/Foil

Super R Diamond™ Radiant Barrier
Super R Plus™ Radiant Barrier

Credit cards accepted