Pipe Wraps
Linear Pipe Wrap - R-4
To help reduce condensation on cold pipes and
heat loss on hot pipes, wrap them with TempShield™ Insulation. Cut a length of pipe wrap from the roll that will
be easy to handle in your working area. Place the white side
of the insulation next to the pipe. Pre-shape the insulation
by wrapping it around the pipe. This will make the taping
easier and help to form a better seal. Remove the protective
backing from the tape and overlap the edge so it just covers
the tape area. On small pipes this will produce a loose fit
and on larger pipes, a snug fit. Insulation value is not
affected by a loose or tight fit.
Spiral Pipe Wrap - R-4
 Simply
spiral TempShield™ Pipe Wrap around your pipes, overlapping 1/2" as you go.
Securely tape with foil tape around each end of your wrapped product. This
procedure provides an air space that will aid the insulation
value. Do not leave any exposed pipe or space where air can
enter between the pipe and the wrap.
|
